When it comes to making an investment to protect your concrete floor, one of the most important aspects that quite often goes overlooked is the type of preparation that the floor will require in order to ensure that your investment pays off for the long haul. There have been many debates over the years about what kind of surface prep is the minimum requirement for various coatings, overlays, or sealing systems.
Muriatic acid etching is often prescribed as the minimum requirement for surface preparation of concrete prior to installing any kind of paint, coating, overlay or self-leveling concrete. Muriatic acid etching is sufficient prep for light-duty areas that will receive regular thin mil paint or sealers but it is nowhere near enough preparation when installing a coating or any kind of concrete or gypsum based product.
Muriatic acid etching is often prescribed as the minimum requirement for surface preparation of concrete prior to installing any kind of paint, coating, overlay or self-leveling concrete. Muriatic acid etching is sufficient prep for light-duty areas that will receive regular thin mil paint or sealers but it is nowhere near enough preparation when installing a coating or any kind of concrete or gypsum based product.
When installing anything other than paint, it is extremely important to implement surface preparation technologies such as diamond grinding or shot blasting. Shot blasting, the more aggressive of the two options, is often prescribed when installing thicker systems, usually 20 mils thick or more. The reason is because shot blasting your floor will leave an aggressive pattern after the surface preparation is complete. However, this is idea for proper adhesion of any non-liquid floor topping system.
For less aggressive needs, such as paint removal, mastic removal or glue removal, grinding is sufficient surface preparation. In other cases, when you are installing a coating or a paint that is thinner in nature, grinding is the best way to go in order to ensure a smooth finish and proper adhesion.
At The Floor Company, all of our surface preparation equipment is backed up by HEPA grade vacuum systems designed for concrete and construction dust.We have grinding and shot blasting solutions for any size of project. Contact us today for a quote
The Floor Company
Address: 1117 Newmarket Street, Unit B, Ottawa, ON K1B 4N4
Phone:(613) 706-6664
