garage floor covering | The Floor Company
ETHAN@THEFLOORCOMPANY.CA | TEL: 613-866-7990
Serving Ottawa, Belleville, Peterborough and Renfrew

Blog

All posts tagged garage floor covering

Concrete Surface Preparation

Posted on January 26, 2016 by Greg Bell in Concrete with Comments Disabled
When it comes to making an investment to protect your concrete floor, one of the most important aspects that quite often goes overlooked is the type of preparation that the floor will require in order to ensure that your investment pays off for the long haul. There have been many debates over the years about what kind of surface prep is the minimum requirement for various coatings, overlays, or sealing systems.
custom concrete floors polished concrete
Muriatic acid etching is often prescribed as the minimum requirement for surface preparation of concrete prior to installing any kind of paint, coating, overlay or self-leveling concrete. Muriatic acid etching is sufficient prep for light-duty areas that will receive regular thin mil paint or sealers but it is nowhere near enough preparation when installing a coating or any kind of concrete or gypsum based product.
When installing anything other than paint, it is extremely important to implement surface preparation technologies such as diamond grinding or shot blasting. Shot blasting, the more aggressive of the two options, is often prescribed when installing thicker systems, usually 20 mils thick or more. The reason is because shot blasting your floor will leave an aggressive pattern after the surface preparation is complete. However, this is idea for proper adhesion of any non-liquid floor topping system.
For less aggressive needs, such as paint removal, mastic removal or glue removal, grinding is sufficient surface preparation. In other cases, when you are installing a coating or a paint that is thinner in nature, grinding is the best way to go in order to ensure a smooth finish and proper adhesion.
At The Floor Company, all of our surface preparation equipment is backed up by HEPA grade vacuum systems designed for concrete and construction dust.We have grinding and shot blasting solutions for any size of project. Contact us today for a quote

The Floor Company

Address: 1117 Newmarket Street, Unit B, Ottawa, ON K1B 4N4
Phone:(613) 706-6664

Self-Levelling Epoxy Floor Makeover

Posted on January 12, 2016 by Greg Bell in Blog with Comments Disabled

In the world of decorative concrete flooring and concrete floor rejuvenation, it would be a challenge to find a more drastic change in less time than getting a self-levelling epoxy floor installed.

It might seem almost counter intuitive that a mix comprised 50% of sand would be self-levelling but that is exactly the case here. Sand is added to epoxy in order to allow it be installed up to 20 times thicker in one go compared to liquid applied epoxy alone.

The sand serves as a “motivating” factor in the process. As the sand settles, it displaces liquid epoxy to the surface where it lays out and flattens, creating a near perfect level surface. The sand also creates an aggregate matrix within the coating. This piled up sand results in a highly impact resistant concrete floor. 

Given the fact that so much thickness can be added to the floor in one go, we will often find ourselves installing it on surfaces that, just days before the building owner was considering ripping out and replacing. Doing so would have resulted in a much higher cost. Not only that, what you end up with when you replace a concrete slab is a smooth surface, however, one that is unprotected and will end up just the same as the one that’s just been replaced.

In the end, save for any contamination or structural issues, coating a floor with a self-levelling epoxy is by far the best choice for the long term because of; less interruption to room access but also financially short term and long term.

Check out the photos below for a better understanding of just how far you can take a floor from beatdown to new. 

BEFORE:

ottawa good time centre before concrete floor patch

AFTER:

ottawa good time centre before concrete floor patchTo ensure your concrete and coating contractor is able install self-levelling epoxy, test your floor for compatibility before making an investment. While epoxy is usually a great way to go, it takes a professional to ensure that you aren’t better served with one of the many other materials out there today.

 

The Floor Company

Address: 1117 Newmarket Street, Unit B, Ottawa, ON K1B 4N4
Phone:(613) 706-6664

What Are The Different Types of Garage Floor Coverings?

Posted on October 27, 2015 by Greg Bell in Concrete with Comments Disabled

Concrete is very resilient and can stand up to all kinds of abuse if it provides the right protection. The garage floor has to endure traffic, oil spills, heavy objects falling on it, and other such problems. To maintain its looks, it’s essential to apply a good, resilient coating to it. There are three ways to go about this. You can apply a latex paint on the floor, add an epoxy coating, or apply polyurethane.custom concrete floors garage

At The Floor Company, we recommend our clients to consider their needs and requirements carefully before choosing a garage floor coating. Let’s consider the options:

  • Latex- This is the most affordable coating available to you. Latex is very easy to apply. It’s essentially like paint and you need to do nothing but use regular rollers and brushes to apply a coat onto the floor. Unfortunately, if you want something this affordable, you’ll need to compromise on the quality.

Latex coatings are susceptible to peeling and chipping. You’ll also need to apply several coats of it to get an even finish. In essence, it’s great for a quick, cost-effective application, but not so great for resilience and durability.

  • Epoxy – While this coating is slightly more expensive than latex, it’s still quite affordable. This material is resilient and will last for several years. You’re essentially coating your garage floor in plastic when you apply this material. The finish is very glossy, sleek, and smooth, giving your garage a clean look. 

This material won’t lift, is very durable, looks great and has many colour and finish options. However, the application process is complicated and should only be done by a professional concrete floor coating team.

  • Polyurethane –This is the coating to choose for the professional garage. It has a very high level of durability and can resist chemical and oil spills very well. It’s also available in a variety of colours and finishes for an attractive garage. However, this coating is more expensive and might not be for the regular home garage. The application process is very complicated as well and you’ll need to hire a professional concrete floor coating team.

For more information on polished concrete, or to get an estimate, you can contact us at The Floor Company. If you’re calling from Ottawa and surrounding areas, dial 1800 461 3121. If you’re calling from Kingston, Belleville, Peterborough and Durham, dial 1877 277 9877. You can also email us at info@thefloorcompany.com or fill in this contact us form.

The Floor Company

Address: 1117 Newmarket Street, Unit B, Ottawa, ON K1B 4N4
Phone:(613) 706-6664